- Parkjet Plans
- SU-37
SU-37
SU-37
Designed by Tomas Hellberg
If you download plans and build the SU-37, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
The Su-37 is a mid-mounted pusher model intended to be flown with tailerons only, but it can easily be equipped with ailerons and rudders. Build it from the plans attached below, or buy it as a kit, with or without motor and ESC, from 6mmFlyRC.
The dimensions of the slots and tabs are made for 6 mm depron.
SPECIFICATIONS
Wing span 72 cm (28 inches) | Length 103 cm (41 inches) | CoG location 10 cm (4 inches) behind the point where the trailing edge of the canards meet the fuselage Propeller slot. Fits propellers with a maximum diameter of 6 inches
BUILD THREAD
Designed by Tomas Hellberg
If you download plans and build the SU-37, please consider sending the designer a donation for all of his hard work and inspiration!
PayPal | tomas@hellberg.name
Suggested Donation: $10.00
NOTE FROM THE DESIGNER
The Su-37 is a mid-mounted pusher model intended to be flown with tailerons only, but it can easily be equipped with ailerons and rudders. Build it from the plans attached below, or buy it as a kit, with or without motor and ESC, from 6mmFlyRC.
The dimensions of the slots and tabs are made for 6 mm depron.
SPECIFICATIONS
Wing span 72 cm (28 inches) | Length 103 cm (41 inches) | CoG location 10 cm (4 inches) behind the point where the trailing edge of the canards meet the fuselage Propeller slot. Fits propellers with a maximum diameter of 6 inches
BUILD THREAD